How To Sell Scrap Copper
The trick to selling scrap copper is to sell it directly to a scrap yard. If you are in the USA, chances are there is one or more scrap yards somewhere in your town/county/city that you may or may not know about.
Every scrap yard will be interested in buying your scrap copper. It is your job as a scrap seller to find the scrap yard with the best price, and that is closest to your house or place of business. You can always call a scrap yard and ask about their current pricing. (You can expect to get prices at or a little below those listed in the upper right corner of this web page.) To find the nearest scrap yards, I suggest using google maps, google places, or a similar local search engine.
Before you haul your payload off to the scrap yard, you will want to first sort it into its separate categories. Unless you sort it properly, the scrap yard will demote it all to the lowest priced category, insuring that you get paid less then it is worth. Scrap copper that is contaminated with steel, aluminum, or other less valuable metals will lower its value significantly. If you have copper pipes with soldered in joints, for example, these are called copper #2. But if you take your time cutting all of the soldered joints out, leaving just the copper pipes, you will have the higher paying
Every yard is different when it comes to insulated scrap copper wire. You may find that it is worth stripping your wire if you cant sell it for a good price, or maybe you will find that you never should strip wire…
Scrap Copper wire can be sorted into 5 different grades:
Again, THESE ARE JUST GENERAL GUIDELINES! Every scrap yard is different. Every scrap yard will purchase scrap copper wire with standards which have been agreed upon between them and a refiner.
Selling Scrap Copper Breakage
Scrap “copper breakage” is another way of saying anything with copper winding. (See How To Scrap Copper Transformers )
If you have scrap electric motors, scrap starters, scrap alternators, scrap transformers, scrap inductors, scrap ballasts, or scrap power supplies you could be getting payed over 3.5x what you are getting for shred steel.
To pull out scrap copper winding, I cut through the winding that stick out of one end with a sawzall. Then I use a 5 point hammer and punch to hit the copper windings out of their slots. If They slide out easily, I will cut through one end of the copper winding, and then pry the winding out on the other side using a pry-bar/ crowbar. This is also one of the techniques you will need to perfect depending on your situation.
Selling Scrap Copper AlloySource: www.scrapmetaljunkie.com