How to lease farm land
Things You'll Need
Cut down the trees on the property with a chainsaw. Leave each stump less than 12 inches higher than the surface of the surrounding ground. Fell each tree, remove its branches, and cut it into firewood. Haul the firewood to an area you have chosen for storage. Stack the firewood until you are ready to use it, or sell it.
Adjust the teeth on your skid loader bucket so that they are parallel to the ground. Drive your skid loader slowly forward keeping the bucket 2-3 inches above the ground to uproot bushes and small trees. Push the vegetation to your loading spot and place it into your dump truck to be hauled away. Be careful and take your time when clearing away brush so that you can avoid stumps and other areas that can damage or trap your skid loader.
Approach each stump with your stump grinder. Start the machine and chip away a few inches of the stump at a time. Grind each stump from the top down. Dig into each stump and grind away the wood to eight inches below the surface of the surrounding ground.
Place debris from the property into the bucket of your skid
loader. Fill the bucket and place the debris into your dump truck so that it can be hauled away. Remember to haul trash and construction debris in a load separate from loads of brush and branches.
Haul top soil to your property with your dump truck. Deposit dump truck loads of top soil onto the ground around your property. Leave 10 feet of space between the loads to give you room to spread the soil.
Push over the piles of top soil with your skid loader. Knock each pile down to fill in the spaces between piles. Adjust your skid loader bucket so that the teeth are pointing down. Lower the bucket until the teeth are covered with top soil. Back the skid loader slowly to contour the soil to the desired shape. Be sure to provide a slight slope to the property for proper drainage. Raise the bucket and drive the skid loader back and forth over the new top soil to compress it to prevent erosion.
Pour fertilizer pellets into your spreader. Walk back and forth, pushing the spreader to deposit fertilizer pellets over the entire property. Leave the soil and fertilizer undisturbed for 2 weeks before planting on your new farm land.Source: ehow.com