Where to buy a guillotine
lower-cost competition version!
(click for info)
This version of our most popular kit incorporates several improvements over the old model, including our new "gap-hop" architecture - now the wheels gently hop over the gap in the tracks instead of pounding over them, eliminating the destructive "thump-bump" of the old model. This enables us to use positive tracking wheels - no more frame-strikes! The wheels are locked-in to a track system that prevents them from drifting off-course during firing. We've also added a turnbuckle based pin angle tuning mechanism, for non-slip ultra-fine tuning of the pin angle. The virtually indestructible steel counterweight boxes are included too! All major improvements for accuracy and repeatability in this one-of-a-kind machine!
Engineered using modern mechanical principles and computer aided design, this mini-powerhouse can hurl a golf ball over 200 feet. It uses guillotine action and a plunging beam to maximize potential energy and a floating arm to convert that energy into projectile motion. Precision crafted of high quality hardwood, the kit contains everything you need to build a working model.*
The trebuchet is essentially a gravity powered energy conversion machine, turning potential energy into kinetic energy and using it to throw a ball. It's a great way to see classical mechanics in action!
Similar to the forty-foot tall, 25 ton behemoth "T-Wrecks " we built on the TV show "In The Name Of Science" (2004, The Discovery Channel), except this model is only 34 inches tall, 18 inches long and 7 inches wide (12 inches wide including the steel boxes) but it hurls more than five times as far as T-Wrecks in scaled distance.
A common complaint from engineering professors is that "Students today have a great understanding of computers, but fewer and fewer of them have any real hands-on, real-world understanding of physics and mechanics." Our kits are designed and intended to spark an interest in real-world science and engineering. and maybe even a bit of history too!
The detailed instructions (14 pages!) are complete with diagrams, photos, tuning tips, equations for calculating the machine's efficiency and more! All parts are pre-cut, pre-drilled and can be assembled to a finished model in one evening (plus glue drying time).
We've put a lot of time and effort into making this kit as easy and complete as possible. It's a fun way to learn about physics and engineering!
FAT, F.A.T. and Floating Arm Trebuchet are trademarks of RLT Industries, inc.
Scissors, Glue, Ruler, a utility knife, small wrenches (for one 1/4" bolt and one 3/8" bolt). Sandpaper is optional.
For a Master carpenter doing a sloppy job: about 2 hours.
- Width: 7" (frame) 12" (with counterweights attached)
Quantity pricing info:
0 to 4 kits, standard price.
5 to 9 kits, 10% off
10 or more kits, 15% off
Orders of $200 or more qualify for FREE ground shipping!
WARNING! This is a functional model intended for educational demonstrations of physics. It contains a fast moving arm and projectile that can cause injury if you make contact when firing. Use only under strict, competent adult supervision.
* You'll need to supply the counterweight material. Anything from nuts and bolts, BBs, coins, sand or a good fist full of pebbles will do!
* Can throw 200 feet when properly constructed and tuned with sufficient counterweights. Your performance may vary.
* FAT, F.A.T. and Floating Arm Trebuchet are trademarks of RLT Industries.
If you are buying this model for the Science Olympiad:
There is a rule which requires the trebuchet arm to remain stationary when the counterweights are removed and the trigger is pulled. The original intent of this rule was to disqualify springs and bungee cords from the trebuchet competition.
Since the FAT does not contain any springs or bungee cords, it does not violate the intent of the rule, even though it does violate the letter of the rule. Keep this in mind if you ever become a lawmaker - good wording is difficult and extremely important in order to keep the intent, without doing harm or injustice to innocence.
If you want to use the FAT for your competition, there are options. First, I'd recommend negotiating with your instructor or judges, let them know about the problem and the intent of the rule, and see if you can get an exemption from it. This has worked for other folks in the past, but not always. It depends on how reasonable your judges are.
If that fails, here's another strategy that has worked. The rule states that the arm cannot move when the counterweights are removed and the trigger is open (unset). In this model, the arm is part of the counterweight system. Its center of gravity falls as part of the launch sequence and the arm's weight (including the wheels and wheel carriage) contributes to the total energy transferred to the projectile. You should be allowed to remove the whole arm and weight-box assembly to satisfy the "no motion" rule. In fact, since the arm is part of the counterweight, if you are not allowed to remove the arm during this test, then your judges ARE violating the letter of the rule in regards to this test!
Once the arm is removed and set aside, it will not move when the trigger is pulled, and the test is passed.
Of course, the decision whether to accept these lines of reasoning are entirely up to the judges of your competition. It would be wise to check with them first before purchasing this kit. If they will not allow it, then the SPECK or the TK3 are your next best options, although nothing performs better than our FAT!
More info about SciOly and the FAT can be found here
Good luck with the competition!Source: www.rlt.com