# How to balance equations

### Balancing Chemical Equations

Chemical equations usually do not come already balanced. Making sure they are balanced must be done before the equation can be used in any chemically meaningful way.

All chemical calculations you will see in other units must be done with a balanced equation.

**IMPORTANT DEFINITION:** A balanced equation has equal numbers of each type of atom on each side of the equation.

The Law of Conservation of Mass is the rationale for balancing a chemical equation. The law was discovered by Antoine Laurent Lavoisier (1743-94) and this is his formulation of it, translated into English in 1790 from the *Traité élémentaire de Chimie* (which was published in 1789): "We may lay it down as an incontestible axiom, that, in all the operations of art and nature, nothing is created; an equal quantity of matter exists both before and after the experiment; the quality and quantity of the elements remain precisely the same; and nothing takes place beyond changes and modifications in the combination of these elements."

A less wordy way to say it might be: "Matter is neither created nor destroyed."

Therefore, we must finish our chemical reaction with as many atoms of each element as when we started.

**Example #1:** Balance the following equation: H_{2} + O_{2} ---> H_{2} O

It is an unbalanced equation (sometimes also called a skeleton equation). This means that there are UNEQUAL numbers at least one atom on each side of the arrow. By the way, a skeleton equation is not wrong, it just hasn't been balanced yet. Presenting it as being balanced would be wrong.

In the example equation, there are two atoms of hydrogen on each side, BUT there are two atoms of oxygen on the left side and only one on the right side.

**Remember this:** A balanced equation MUST have EQUAL numbers of EACH type of atom on BOTH sides of the arrow.

An equation is balanced by changing coefficients in a somewhat trial-and-error fashion. It is important to note that only the coefficients can be changed, NEVER a subscript.

**Important point:** the coefficient times the subscript gives the total number of atoms.

Three quick examples before balancing the equation. (a) 2H_{2} - there are 2 x 2 atoms of hydrogen (a total of 4).

(b) 2H_{2} O - there are 2 x 2 atoms of hydrogen (a total of 4) and 2 x 1 atoms of oxygen (a total of 2).

(c) 2(NH_{4} )_{2} S - there are 2 x 1 x 2 atoms of nitrogen (a total of 4), there are 2 x 4 x 2 atoms of hydrogen (a total of 16), and 2 x 1 atoms of sulfur (a total of 2).

And, one more: how many oxygens are indicated: 3Ca(NO_{3} )_{2}

Answer: 18. The 3 on the nitrate times 2 outside the parenthesis equals 6 oxygen in one formula unit. The coefficient of three times the 6 gives the final answer of 18.

So, now to balancing the example equation: H_{2} + O_{2} ---> H_{2} O

The hydrogen are balanced, but the oxygens are not. We have to get both balanced. We put a two in front of the water and this balances the oxygen. H_{2} + O_{2} ---> 2H_{2} O

However, this causes the hydrogen to become unbalanced. To fix this, we place a two in front of the hydrogen on the left side. 2H_{2} + O_{2} ---> 2H_{2} O

This balances the equation.

Two things you CANNOT do when balancing an equation.

1) You cannot change a subscript.

You cannot change the oxygen's subscript in water from one to two, as in: H_{2} + O_{2} ---> H_{2} O_{2}

True, this is a balanced equation, but you have changed the substances in it. H_{2} O_{2} is a completely different substance from H_{2} O. So, it's not the answer to the question that was asked.

2) You cannot place a coefficient in the middle of a formula. H_{2} + O_{2} ---> H_{2} **2** O

Water only comes as H_{2} O and you can only use whole formula units of it.

Two more points:

1) Make sure that your final set of coefficients are all whole numbers with no common factors other than one. For example, this equation is balanced: 4H_{2} + 2O_{2} ---> 4H_{2} O

However, all the coefficients have the common factor of two. Divide through to eliminate common factors like this.

Technically, the equation just above is balanced, but only if you ignore the "no common factors other than one" rule. The correct answer has all common factors greater than one removed. If you were to answer a test question balanced as above, you will probably only get partial credit, if that.

2) NO fractions allowed in the final answer, only whole numbers. For example: H_{2} + Cl_{2} ---> (1/2)HCl

is an allowable step along the way to the answer, but it is not the final answer.

The use of fractions in balancing is a powerful tool. Look for it in the solved examples.

From here on out, I will simply give the equation to be balanced.

Remember that the rule is: A balanced equation MUST have EQUAL numbers of EACH type of atom on BOTH sides of the arrow.

The correctly balanced equation is: H_{2} + Cl_{2} ---> 2HCl

Placement of a two in front of the HCl balances the hydrogen and chlorine at the same time. This happens fairly often at the end of a balancing sequence, when the placement of one coefficient balances two different elements at the same time.

Hint: think about what the least common multiple is between 2 and 3. That's right - six.

The LCM tells you how many of each atom will be needed. Your job is to pick coefficients that get you to the LCM.

The correctly balanced equation is: 3O_{2} ---> 2O_{3}

**Example #4:** Na + H_{2} O ---> NaOH + H_{2}

In the skeleton equation as written, the Na and the O are already balanced. So, we look only at the H.

Notice that the H must come in twos on the left-hand side. That means we must have an even number of hydrogen on the right-hand side. We do this: Na + H_{2} O ---> 2NaOH + H_{2}

to make an even number of hydrogens on the right. We then balance the H like this: Na + 2H_{2} O ---> 2NaOH + H_{2}

Notice that the first placing of a 2 messed up the balance of the Na and the O. In addition, notice that the second placing of a 2 balances the oxygen and the hydrogen at the same time.

The last step is to balance the Na: 2Na + 2H_{2} O ---> 2NaOH + H_{2}

and it's done.

Here's another method. Go back to the skeleton equation and balance it like this: Na + H_{2} O ---> NaOH + (1/2)H_{2}

What you did with (1/2)H_{2} is reduce the number of hydrogens on the right-hand side from a total of

3 to a total of 2. Since everything but the hydrogen was already in balance, the equation is now balanced.

Multiply through by 2 to get the final answer (which should not have any fractions in it).

**Example #5:** Fe + CuSO_{4} --> Cu + FeSO_{4}

As you examine the equation, you see that it is already balanced. There is one Fe on each side, one Cu, one S and four oxygens (the last two can also be identified as one sulfate on each side).

Nothing needs to be done to this equation. As it is written, it is balanced.

You sometimes see this presented using the phrase "balanced as written."

Also, students are sometimes confused by this type of problem (sometimes even suspicious that a trick is being played on them). In many cases, a students has seen example after example where something is done to the equation to balance it. The above example needs nothing to be done; it is already balanced.

**Example #6:** Zn + HCl ---> ZnCl_{2} + H_{2} Upon examining this equation, you see that there is already one Zn on each side of the equation. We will attempt to leave it alone, if at all possible, since it is already balanced.

One the right side, we see two chlorines and two hydrogens, with only one of each on the left. Putting a two in front of the HCl doubles the number of chlorine and hydrogen on the left side.

This now leaves us with two chlorines and two hydrogens on each side of the arrow, making them both balanced.

Since the zinc was already balanced, the entire equation is now balanced.

Zn + 2HCl ---> ZnCl_{2} + H_{2}

**Example #7:** KClO_{3} ---> KCl + O_{2} Start by noticing the the K and the Cl are ALREADY balanced in the skeleton equation. However, the oxygen is out of balance with three on the left and two on the right.

It is important to emphasize that the oxygen on the left will increase only in steps of three, while the oxygen on the right will increase only in steps of two. The question to ask yourself is "What is the least common multiple between 2 and 3?" The answer of course is six. We need six oxygens on each side of the equation. We use a two on the left side since 2 x 3 = 6 and we use a three on the right side since 3 x 2 = 6.

This causes the K and the Cl to become unbalanced, but putting a two in front of the KCl on the right side fixes that.

This problem is interesting because you focused on the oxygens first. Normally, oxygen is the last (or next-to-last) element to be balanced.

Another way to balance this equation is by using a fractional coefficient:

KClO_{3} ---> KCl + (3/2)O_{2}

And, in one step, it's balanced. You then multiply through by 2 to get the whole number set of coefficients, the 2, 2, 3 just above.

**Example #8:** S_{8} + F_{2} ---> SF_{6} An eight in front of the SF_{6} will balance the sulfurs.

This now gives us 48 fluorines on the right-hand side, since 8 x 6 = 48. Use a 24 in front of F_{2} since 24 x 2 also equals 48.

**Example #9:** Fe + O_{2} ---> Fe_{2} O_{3} In the unbalanced equation, there was only one Fe on the left and two on the right. Putting a two in front of the Fe on the left brings the irons into balance.

- The oxygen on the left ONLY comes in twos, while the right-hand side oxygen comes only in threes.
- We have to get an equal number of oxygens. (Remember, we can only adjust the value of the coefficient. We cannot change the subscript.)
- The least common multiple between two and three is six. This means we will need six oxygens on each side of the equation.
- To get this, we put a three in front of the O
_{2}since 3 x 2 = 6 and we put a two in front of the Fe_{2}O_{3}since 2 x 3 = 6.

The Fe was balanced, but has become unbalanced as a consequence of our work with the oxygen. Putting a four in front of the Fe on the left solves this.

This equation could also have been balanced using a fractional coefficient:

**Example #10:** C_{2} H_{6} + O_{2} ---> CO_{2} + H_{2} O First, balance the carbons with a two in front of the CO_{2}. Then balance the hydrogens with a three in front of the H_{2} O. This leaves the following equation: C_{2} H_{6} + O_{2} ---> 2CO_{2} + 3H_{2} O

Only the oxygens remain to be balanced, but there is a problem. On the right side of the equation, there are seven oxygen atoms, BUT oxygen only comes in a group of two atoms on the left side. Another way to say it - with O_{2} it is impossible to generate an ODD number of oxygen atoms.

However, that is true only if you were using whole number coefficients. It is allowable to use **FRACTIONAL** coefficients in the balancing process. That means I can use seven-halves as a coefficient to balance this equation, like this: C_{2} H_{6} + (7/2)O_{2} ---> 2CO_{2} + 3H_{2} O

Generally, the fractional coefficient is not retained in the final answer. Multiplying the coefficients through by two gets rid of the fraction. here is the final answer: 2C_{2} H_{6} + 7O_{2} ---> 4CO_{2} + 6H_{2} O

Also, improper fractions like 7/2 should be used rather than a mixed number like 3 1/2.

**Example #11-13:** Balance these three equations using fractional coefficients: S_{8} + F_{2} ---> SF_{6}

Alternate answer for the third equation:

Generally speaking, fractions are mostly used with diatomics (with O_{2} is the most common). In addition, as you delve deeper into balancing, you may even see something like (1/2)H_{2} O used in a balancing step, but you will never see it as the final answer.

However, you must balance it with one restriction: the coefficient in front of the water must be a one.

1) No fraction to balance the hydrogen: H_{2} + O_{3} ---> H_{2} O

2) Fraction to balance the oxygen: H_{2} + (1/3)O_{3} ---> H_{2} O

(1/3)O_{3} means one O on the left side and there's one O on the right.

Balancing with a 1/3 as the fractional coefficient is unusual, but you do see it every now and then. Especially, if a teacher is trying to trip you up. Say by using 1/2 all the time, but then suddenly have a 1/3 or a 5/2 on the test. Teachers are sneaky! (Well, at least we think we are!)

However, balance it with one restriction: the coefficient in front of the P_{2} O_{5} must be a one.

Category: Forex

## Similar articles:

Chemical Reactions and Balancing Chemical Equations

How do you balance chemical equations?