Credit portal




Tips on how to paint a room

tips on how to paint a room

You'll have to start early, but you can get it done by bedtime.

1. Cover up.

Protect the floor, and any furniture you can't (or don't want to) move, from paint splatters and spills. For the floor, choose fabric drop cloths instead of plastic ones, as plastic can be slick under your feet or, worse, the ladder.

2. Start with a fresh surface.

3. Prep the borders.

5. Start painting.

Now you're ready for the main event: With an angled brush or a sponge tool, paint a two-inch swath around the edges of woodwork and the ceiling, which should be taped off (see step 3). Then fill in the central unpainted space using a paint tray and a roller (1/4-inch nap for smooth surfaces, 3/8-inch nap for semi-smooth, or 5/8-inch nap for rough — the wrong tool will apply too much or too little paint) in overlapping W- or M-shaped strokes for the best paint distribution.

For easier cleanup later, try a quick-release frame-handle roller, like Shur-Line's ($8, ). Other worthy investments: an extension pole, so you can stash away

the ladder after the edging step; a paint-can opener; and a pour spout to lessen mess. Let the first coat dry at least a couple of hours, then coat again. (Between coats, cover the tray and brush with plastic wrap touching the paint surface, and refrigerate.)

6. Wrap it up.

Rinse your paintbrush and roller (if you don't toss it) under a faucet until the water runs clear. Decant the tray's leftover paint back into the can; seal the can tightly by placing a paper towel over the lid and tapping the lid edges with a hammer. Rinse the tray. Once the brush's bristles are totally dry, slip the brush back into its original paper wrapper to keep the bristles from fanning out, or try this DIY fix: Fold a thick piece of paper around the bristles; tape to secure.

7. Leave no trace.

Have a moist rag handy to wipe fresh splatters. Scrape off dried drips with a credit card or plastic spatula. Remove masking tape before you call it a night, pulling it off at an angle, to avoid tearing the finish.

Category: Taxes

Similar articles: